Chosen Solution

I cut open then cable and I now have a Red, Green, Blue and Copper wrapped around a White wire. I have my replacement plug and also need help to where I would solder them.

Hi @jeci , This is the wiring for a Turtle beach Ear Force PX22 so a reasonable assumption would be that it would be the same for a Turtle Beach Ear Force Z22 Starting from the “tip”

  1. Green - tip
  2. Red - ring 1
  3. White - ring 2
  4. Blue and copper twisted and soldered together - sleeve.

I’ve never seen this combination of wires before. My advice would be to strip back the original plug and see how it wires up. Normally white is ground/neutral (the copper part too) and red is the right channel. Hope this helps!

Hi, In Samsung Galaxy compatible earphone, the pinouts are as follows: 1= Head = Left = Green 2= Ring 1 = Right = Blue 3= Ring 2 = Ground = Copper = Gold = Common 4= Base = Mic = Red

So: 3,4 = pause switch 1,3 = Left earphone (35-50 Ohms) 2,3 = Right earphone (35-50 Ohms)