Chosen Solution
Hello, After a wine spill on a 2011 Macbook air (A1369 EMC 2469) the backlight isn’t working anymore. The MacBook works fine, lcd is still functioning. Connected to a external display it also works fine, so it is probally not the graphic chip. Did some research online, and found some hits about the fuse. Does anyone have documentation about this fuse or what the problem could be.
Check the LVDS cable connector and the LVDS socket for any damage then also verify with a multimeter if the backlight fuse has continuity.
Before you worry about any fuses did you fully clean the wine out of the system? Make sure the right corner hinge area is clean (were the display is connected to the logic board)
tonversteeg1, yes the “P” is a fuse. Your display connector appears to show a lot of damage, so you may have to repair the connector as well as the circuit to it. That may be the reason for you bad fuse as well. The fuse is a 2AMP-32V 0402-HF and for more information on the fuse, check on here http://elcodis.com/parts/117249/0435002K…
